FUJI ZPA Infrared Gas Analyzer
This gas analyzer (ZPA) is capable of measuring the concentration of NO,SO2,CO2,CO,CH4 and O2 components in sample gas. NO,SO2,CO2,CO and CH4 are measured by non-dispersion infrared method (NDIR), while O2 is measured by fuel cell, or zirconia method. Up to 5 components including O2 can be measure
Enquiry now
Product Details Specifications User's guidance After-sales support

I. Introduce

This gas analyzer (ZPA) is capable of measuring the concentration of NO,SO2,CO2,CO,CH4 and O2 components in sample gas.  NO,SO2,CO2,CO and CH4 are measured by non-dispersion infrared method (NDIR), while O2 is measured by fuel cell, or zirconia method.  Up to 5 components including O2 can be measured simultaneously. ZPA also features its compact design that enables downsizing of measurement system, and simple structure with single-beam IR system that requires minimal maintenance. ZPA is best suited to the measurement of exhaust gas from refuse incinerators, boilers, and various industrial furnace.

II. Features

1. Compact and lightweight H133*W483*D382mm, approximate 11kgs.
2. Easy maintenance. Maintenance is easy due to the simple measurement unit of single-beam system adapted.
3. User-friendly operation. Clear and easy-to-read display of all five gas concentrations at once.
4. Extensive functions. Various optional functions are available such as auto calibration control, atmospheric pressure correction, high and low concentration alarm, remote range switch, and range identification signal, etc.
5. Max 5 gases including O2;
6. Measuring range ratio max. 1:10 (except O2)
7. minimum and maximum range settable one range or two ranges

III. Detecting gases

II. Specifications

Online time: From 9:00 am -18:00 pm at working days
Tel: +86-27-87955899 
For non-working time:+86-138 7102 2002 
Email:info@tyzkkj.com
Related suggestion