IV. Applications Suitable for steel, chemical, coal gasification, biogasification, energy saving mon

Home > PRODUCT > Portable gas analyzer > Portable TCD H2 gas analyzer

Portable thermo-conductivity H2 gas analyzer TY-6200P

Stack emissions gas analyzer is a gas analysis product independently developed by the company for environmental monitoring online and industrial online analysis. The analyzer is based on ultraviolet differential absorption spectroscopy (DOAS) and chemometrics algorithm (PLS). It can measure SO2, NO,

Enquiry now

Product Details Specifications User's guidance After-sales support

I. Introduction

The portable thermal conductivity hydrogen analyzer TY-6200P adopts the most advanced TCD thermal conductivity technology, which is mainly used to measure the H2 volume concentration in various gases.

II. Features
1. Black anodized, stylish appearance, strong sense of technology, light weight, small size, and external dimensions are only 136mm * 136mm * 270mm.
2. The imported ECD electrochemical gas sensor is used.
3. The instrument measures the H2 volume concentration in the sample gas. Add the over-range limit enable function to ensure the measurement accuracy within the range, the over-range can be measured and provide a reference for the measured value.
4. The caloric value is automatically calculated, and the caloric unit Kcal / m3 and MJ / m3 can be switched freely.
The internal gas interference of the instrument is automatically corrected to ensure no interference in the measurement results.
Correct the interference of CO, CO2, and CH4 on the measurement result of H2, and accurately measure the concentration of H2.
5. The change in gas sampling flow has no effect on the measurement results of the H2 thermal conductivity sensor.
6. The instrument has the function of intelligent calibration of the user's calibration ventilation concentration to prevent misuse by the user and cause the instrument to be unusable.
7. The instrument testing time is fast, and the entire testing process can be completed in one minute.
8. The instrument automatically samples and analyzes and detects. Compared with Austrian and chromatographic gas analysis, the operation is simple, the measurement speed is fast, and no consumables are used.
9. The equipment is simple to operate and easy to carry, and can be operated after the personnel are trained on site.
10. The equipment is suitable for direct sampling test of industrial pipelines, and for sampling and analysis of airbags in laboratory.
11. Built-in lithium battery, soft-start power switch, intelligent battery power management, low battery alarm, to avoid the instrument working under low battery conditions.
12. English software operating systems are available.
13. The instrument software is powerful, with functions such as automatic data storage, query, deletion, and USB export. The history data storage site name can be customized, and the measurement data storage interval can be customized.
14. RS-485 digital output interface
15. Built-in imported sampling air pump, with sampling flow display and sampling flow setting, the state of the sampling pump can be dynamically tuned to meet on-site testing under various pressure conditions
16. It can be connected with an external pre-processing device to increase on-site measurement accuracy and protect the instrument.
17. Modular product design, remote software upgrade.

III. Specifications

Measurement	H2, calorific value available
Technology	TCD thermo-conductivity
Ranges	H2:0-100%vol Ranges customizable on request without price increase
Resolution	0.01%
Linearity error	≤2%FS
Repeatability	≤1%FS
Gas conditions at analyzer inlet	Flow:0.7L-1.2/min Pressure:2kPa≤ inlet pressure≤ 50kPa Quality: No dust, moisture, tar (external safety filter and optional gas washing unit)
Operating conditions	Tamb : -5°C to 50°C / Pamb : 86 to 108 kPa / RH : 0-90% non-condensing
Response time (T90)	≤ 15 sec
Communication interface	RS485
Power supply	External 110V-220 VAC-50Hz, rechargeable lithium battery 12.6V power charger

IV. Applications

Suitable for steel, chemical, coal gasification, biogasification, energy saving monitoring, energy efficiency evaluation and other fields, measuring the volume concentration of H2 in gases such as coke oven gas, blast furnace gas, converter gas, mixed gas, generator gas, and biogas.

III. Specifications

Measurement	H2, calorific value available
Technology	TCD thermo-conductivity
Ranges	H2:0-100%vol Ranges customizable on request without price increase
Resolution	0.01%
Linearity error	≤2%FS
Repeatability	≤1%FS
Gas conditions at analyzer inlet	Flow:0.7L-1.2/min Pressure:2kPa≤ inlet pressure≤ 50kPa Quality: No dust, moisture, tar (external safety filter and optional gas washing unit)
Operating conditions	Tamb : -5°C to 50°C / Pamb : 86 to 108 kPa / RH : 0-90% non-condensing
Response time (T90)	≤ 15 sec
Communication interface	RS485
Power supply	External 110V-220 VAC-50Hz, rechargeable lithium battery 12.6V power charger

IV. Applications

Online time： From 9:00 am -18:00 pm at working days

Tel： +86-27-87955899
For non-working time：+86-17749591904

Email：info@tyzkkj.com
Whatsapp: +86-17749591904

Related suggestion

Biomass syngas analyzer CH4/CO2/CO/H2/O2/CxHy TY-6331 Biomass syngas analyzer CH4/CO2/CO/H2/O2/CxHy TY-6331 can measure CH4,CO2,CO,CnHm,O2 and H2 at the same time in one unit, and calculating heating value in MJ/M3 or Kcal/m3.
Infrared biogas analyzer TY6320 The online infrared biogas analyzer TY-6020 uses the most advanced NDIR non-spectral infrared technology and ECD electrochemical technology. It is mainly used to measure CO, CO2, CH4, H2, O2, H2S six gas concentrations in biogas and various anaerobic fermentation processes and experiments.
Ex-proof 24-hour online syngas analysis system TY-8330EX Ex-proof 24-hour online syngas analysis system TY-8330EX consists of online continuous syngas analyser, gas conditioning system, washing system, PLC system, industrial computer system(optional). It can measure CH4,CO2,CO,CnHm,O2 and H2 at the same time in one unit, and calculating heating value in